Categories

Abrasive Adhesive & Sealants Air Hose, Fittings & Tools Builders' Hardware & Supplies Cabinet Hardware Casters & Carts Cleaning Supplies Cutting Tools & Saw Blades Door Hardware & Locks Electrical & Lightings Fasteners & Screws Fittings & Pipes Lubrication & Coolants Paints & Solvents Pipe & Pipe Hangers Plumbing Supplies Power Transmission Rigging Hardware Safety Supplies Services Steel, Alloy & Plastic Material Tools: Hand Tools: Power Welding Machine & Supplies
prodImg

Model No. MBS


Xcel (MBS) Marine Bond & Seal White 290mL

Features

  • Extremely STRONG!!!
  • Permanently flexible
  • Resist Vibrations
  • Adheres to wet and dry surfaces
  • Suitable for indoors and outdoors
  • Paintable
  • Applicable under water
  • Odourless
  • High UV and Fungus resistance
  • Fast curing
  • Cures shrink free
  • High adhesive strength
  • ISEGA & HACCP Food Grade Certified
  • Heavy Duty Caulking Gun is recommended
  • Not recommended on Drywall or Stainless Steel

Raw material basis: MS Polymer
Colour White
Consistency: Non-slump paste
Specific gravity: approx. 1.72 g/ml
Tensile Strength: 4.03 MPa / 585 Psi
Skin forming time: 15 – 20 minutes (at 23ºC; 50% R.H.)
Curing rate: 2-3 mm/24 hr
Application temperature: -37°C to 40°C
Service temperature: -40ºC to +90ºC
Shore A hardness (ISO 868): 58
Modulus – elongation at 100% – (ISO 37): 2.45 Mpa. Max. tensile
Elongation at break (ISO 37): > 250 %
Disclaimer: These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. The time until complete curing may be extended at lower temperature, lower humidity or increasing film thickness.